Ears media 2101 © information | Terms  and conditions

£75 Including

1st Class Postage

• MP-1  Miniature Multi-purpose Microphone
• Element: Back Electret Condenser
• Polar Pattern: Line + gradient
• Frequency Response: 30 Hz - 18 KHz
• Open Circuit Sensitivity: -60 dB / microbar
• Impedance: 200 Ohms
• Maximum Input SPL: 119 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 89 dB, 1 kHz at Max SPL
• S/N Ratio: 64 dB, 1 kHz at 1Pa
• Operating Voltage: Phantom Power 9-52 VDC, 2mA typical
• Foam windshield supplied
• Output Connector: miniature 3 pin XLRM
• Pre-amp Connector: 3 pin XLRM
• 
  

This is a miniature shotgun style multi-purpose microphone kit designed to allow mounting from below and from above. The kit comes complete with a metal cast base, microphone clip, pre-formed wire hanger, ceiling support bracket, surface mount support bracket, foam windshield for breezy conditions and narrow diameter mic to pre-amp cable. The kit can be used for stage or video applications when low visibility microphones are required. Mounted on a table top or on a stage floor, good pick-up is assured, and when flown from above, microphone angle can be set by the wire hanger, which slips over the cable. A really useful range of mountings are provided in the kit box, and the line/gradient polar response makes it

A suitable microphone for groups of people or

Musicians - really useful for choirs and small

Ensembles.